SciCan, Inc.

				Partner Perspectives allows marketers to connect directly with the DPR audience by enabling them to share their content. This content does not necessarily reflect the views of Dental Products Report editorial staff or UBM.

	The stericenter is definitely not as exciting as a shiny new CAD/CAM or 3D radiography unit. This is just one of the many reasons that the instrument processing area, or “stericenter”, is often overlooked and underfunded.  Sometimes it is relegated to the far back of the office in a closet that barely fit the vacuum cleaner and mop bucket that used to be kept there. This is a big mistake because the stericenter is the heart of your practice. All of your instruments need to flow through the stericenter as efficiently as possible to keep your practice operating. Without clean and sterile instruments, your other fancy technology can’t be put to good use, and every area of the practice will end up suffering. Staff will be stressed, patients will be upset that their appointments started late; and further downstream, revenue will suffer. The following is a list of questions, broken out by topic, to help you make smart decisions about designing your stericenter.    

	The CDC recommends that it should be. This is to minimize the distance that contaminated instruments are transported. A centrally located sterilization area also makes it quicker and easier for staff members to reprocess instruments and keep an eye on the process so that issues don’t go unnoticed. When locating your sterilization area within the practice, think about making it a show piece for your office. When patients see a clean and well organized sterilization area, it shows them that their safety is a top priority for your office. This helps differentiate you from the office down the street where instrument cleaning and sterilization is hidden away from patient view.

Have you allocated enough space to set your stericenter up properly?

	The CDC recommends dividing the instrument processing area into 4 distinct sections.

	1: Receiving, cleaning and decontamination

	These sections should be divided physically, or at a minimum spatially, to prevent cross-contamination from spray and splatter. Adequate counter space should be provided for staff members to perform necessary duties such as sorting, drying, and packaging instruments, as well as space to unload the autoclave without compromising sterility. It is important to store sterile instruments where they will not become contaminated. Drawers under the counter in sections one through three of the sterilization area are not a good option because contaminated fluids can drip onto them. Dental grade sterilization centers achieve all of these goals and typically last much longer than contractor grade cabinetry. They also have dental specific features that prevent cross-contamination, such as doors the can be opened without touching them. Lastly, make sure to factor in any future growth you anticipate. If you plan to bring in specialists a few days a week or plan to add a hygienist or associate, be sure to build in extra space to add cleaning and sterilization capacity when the need arises. 

How will you handle distilled water for sterilizers and water for dental unit bottles?  

	Purchasing distilled water at the store can be a hassle, and using a steam distiller is very slow. SciCan’s Vistapure water filter can produce steam distilled quality water for your sterilizers and provide filtered water for your dental unit bottles, ultrasonic cleaner, and instrument washer. If you will be utilizing a Vistapure, it is important to allocate space for the filter and water storage tank when designing the stericenter.

Do you want to automate filling and draining of your sterilizers?  

	Adding autofill accessories to a Vistapure water filter allows SciCan’s Bravo and Statim sterilizers to automatically fill themselves. Auto-draining can be achieved using the included hardware with the Bravo vacuum sterilizer. Statim autoclaves will need a VistaCool bottle to auto-drain.

	This decision will affect many of the other items in this list, so take the time to research them. Not all cassettes are created equal. Cassettes that hold instruments firmly in individual slots are preferred. This prevents the instruments from poking out of the cassette and injuring someone, as well as keeps them from banging together during handling and instrument reprocessing. Cassettes eliminate the manual labor of sorting instruments, keep the instrument tips sharper, and will keep your instruments looking clean and shiny.

	SciCan’s Hydrim instrument washers can hold two-to-three times more instruments than the largest ultrasonic cleaners. A Hydrim will wash, rinse, and dry your instruments in about 40 minutes. This allows staff members to focus on turning over their operatories and makes it easier for your office to stay on schedule. It also reduces the chance of staff members being accidentally injured while processing contaminated instruments. Instrument washers are the fastest growing segment of the sterilization market because they make instrument processing much more efficient.

How large, and how many ultrasonic cleaners will you need?

	Ultrasonic cleaners are not as safe or efficient as instrument washers, but are still necessary for some items. Burs, dental appliances,= and prostheses should be cleaned in an ultrasonic cleaner. If you are not using an instrument washer it is important that you have enough cleaning capacity to keep up with your workflow. Offices that are cleaning cassettes in an ultrasonic cleaner may need more than one ultrasonic cleaning unit.

How will you clean and lubricate your handpieces?

	While handpieces can be maintained manually, it is time consuming to properly lubricate and purge them. Oil and cleaner should be sprayed into handpieces after use. Then each handpiece should be purged for 20-30 seconds on the dental unit or a manual purging station. This ensures that debris and excess lubricant, is thoroughly purged out of the handpiece. If this is not done properly, it can cause premature handpiece failure and excess oil to contaminate the prep and the doctor's gloves. Lubricant should also be applied to each handpiece chuck to prevent burs from falling out or becoming stuck in the chuck. SciCan’s Statmatic handpiece maintenance unit can clean, lubricate, and purge up to three handpieces each cycle. It also has a chuck lubrication port which makes proper chuck maintenance simple and easy. This frees up staff to complete other tasks and will help reduce handpieces repair costs through automated, consistent maintenance.

Do you have extra sterilization capacity to prevent down time when one sterilizer needs maintenance?

	Relying on your dental dealer to rush a rental sterilizer to your office when a sterilizer breaks can be risky. They may not be able to deliver the rental before patients need to be rescheduled, or they may not have any available.  Counting on an old backup sterilizer to function properly after being pulled out of storage can also be risky. Having your stericenter equipped with multiple sterilizers, and more capacity than you need on your busiest day, is the best way to prevent unexpected down time. If you are using cassettes, your “extra” sterilizer should be large enough to hold your largest cassettes.

Can at least one of your sterilizers process unwrapped instruments in less than 15 minutes?

	If your office gets behind on instrument processing, a Statim can help you get caught back up very quickly.  Unwrapped Statim cycles can be as fast as six minutes in a Statim 2000 and nine minutes in a Statim 5000. This allows you to process lots of instruments, very quickly, to meet demand when necessary. Instruments processed unwrapped must be used immediately and transported aseptically. The rest of the time your Statim can be used for normal wrapped instrument sterilization. 

Will you be connecting your Statim and Hydrim to the internet?

	SciCan’s exclusive G4 networking technology allows Statim sterilizers and Hydrim instrument washers to connect to the internet. This allows for electronic logging and verification of cycles, maintenance reminders, and instant communication with SciCan technicians if a cycle fault occurs; all at no charge. Cycle data is automatically stored electronically and can be transferred to a computer for viewing, printing, or backup, by utilizing the included USB flash drive or setting up automated cycle completion emails. This eliminates the need for a printer to be connected to the sterilizer in offices that are required, or choose, to log their sterilization cycles.

	Dental dealers are an excellent resource to utilize when making changes to your office. They have lots of experience designing and installing dental equipment and can help save you from costly mistakes. Most of them however are not experts in infection control, workplace safety, and instrument management. Consulting with an expert in these areas can help you get the most out of your stericenter.  SciCan’s 

 have been extensively trained in these areas, and are uniquely qualified to work with you and your dental dealer to make sure that your stericenter meets SciCan’s SPECs.
	
	

 A poorly designed and minimally equipped stericenter can negatively affect every area of your practice.  If instruments can’t safely and efficiently be processed, it can cost your office dearly in lost productivity, unexpected down time, decreased patient satisfaction, workplace injuries, and unnecessary stress.  Working with a sterilization expert and investing the time, space, and money to set up your stericenter properly will protect your practice from these revenue draining problems.  

	For more information please contact your local 

SciCan Regional Infection Control Trainer

Articles

Does your stericenter meet SciCan’s SPECs?

	SciCan has set the benchmark for sterilization and instrument reprocessing technology. For more than 20 years SciCan has been developing and manufacturing highly innovative infection control products that address the need for versatility, flexibility, and efficiency in today’s environments.

	SciCan is proud to announce the launch of OPT

28, an ultrasonic cleaning solution made with hydrogen peroxide.

Related reading: SciCan partners with Vista Research to release VistaPure AutoFill

28 Ultrasonic cleaning solution is described as the most effective, efficient and gentle choice for dental offices; offering you the peace of mind that you are compliant while protecting your patients, yourself and the environment.

	100% cleaning efficiency against carbohydrates, lipids and proteins

	Bacteriostatic – Stops bacteria from growing

	Prevents biofilm and organic debris build up

	Hydrogen Peroxide breaks down into water and oxygen

	No active residues help reduce environmental impact

	Enzyme free; non-irritating to the eyes and skin at its in-use dilution

	No volatile organic compounds which contribute to indoor air pollution

	1. J.A. Molinari, Ph.D., P. Nelson, B.S. Cleaning Efficiency of OPTIM 28 Ultrasonic Cleaner Solution. Ann Arbor: Dental Advisor, 2016.

	2. M. Cowen, R. Yapp, J. M. Powers. Testing the Development of Staining of Instruments Cleaned in an Ultrasonic Cleaner. Ann Arbor: Dental Advisor, 2016.

SciCan introduces OPTIM 28 Ultrasonic Cleaning Solution

	SciCan, partnering with Vista Research, recently announced the VistaPure AutoFill, an efficient, reliable and maintenance-free solution to filling your autoclaves with distilled, quality water, enabling hands-free convenience.

	VistaPure AutoFill accessory kits work with all 

 and can be easily installed on any new or older-model STATIM 2000 or 5000, or any BRAVO autoclave. The device is said to be efficient, with no more staff time spent filling autoclaves, meaning more time with patients; convenient, with no more purchasing and storing distilled water; and easy, with no more spills while filling autoclaves manually.

Related reading: Preventing infection with sterilizers

	A 12-foot length of clear polyurethane tubing is already attached to the AutoFill manifold. If the desired distance between the connection to the VistaPure and the autoclave is greater than 12 feet, simply order a longer length of the clear polyurethane tubing, as the distance from the VistaPure to the autoclave is not limited, except by the feed tubing.

	For more information on SciCan products, visit 

SciCan, partnering with Vista Research, recently announced the VistaPure AutoFill, an efficient, reliable and maintenance-free solution to filling your autoclaves with distilled, quality water, enabling hands-free convenience.

SciCan partners with Vista Research to release VistaPure AutoFill

	SciCan, partnering with Vista Research, announced the VistaPure, a specialized water filtration system for STAT

 cassette autoclaves, BRAVO fractionated vacuum sterilizers, HYDR

 instrument washers, ultrasonic cleaners, dental bottles and other select autoclaves and instrument washers.

 reportedly provides two grades of high quality water for the ultimate in convenience. The system connects directly to the city water supply and is designed to send purified water exactly where you need it in the stericenter for easy, on-demand use.

More on SciCan: Category cruncher: Handpieces

 VistaPure's handheld point-and-shoot wand is said to make it easy for anyone to fill autoclaves-no matter where they're located. And the system's mounted faucet reportedly makes it easy to fill dental unit bottles over a sink. SciCan also offers unique automatic water filling control options for its STAT

 and BRAVO sterilizers along with the HYDR

 VistaPure is said to provide a high volume of ready-to-use water on demand. Its large 4.25-gallon storage tank means you don't need to wait for deionization and R/O processes to take place.

 Each VistaPure features an in-line TDS meter that monitors water quality and reportedly makes it easy to know when it's time to replace your filters.

	For more information on the complete line of SciCan infection control products and accessories, please visit scicanusa.com.

Related reading: New SANAO handpiece line features unique Hygiene Protection System resin filling

SciCan, partnering with Vista Research, announced the VistaPure, a specialized water filtration system for STATIM cassette autoclaves, BRAVO fractionated vacuum sterilizers, HYDRIM instrument washers, ultrasonic cleaners, dental bottles and other select autoclaves and instrument washers.